![]() so I decided I'd take advantage of the groves. ![]() I only have one cloth mid-panel and the big, heavy metal isn't magnetic, which made it annoying even before I covered it in thick material. I also decided that I was going to make my metal panels push-pin friendly. If you get cheaper fabric, or something on sale, you could probably do this for under $20 very easily. Overall I spent about $35 on all my fabrics, and still had enough to cover the cushion top on my file cabinet, and a pillow or two. I bought 6 yards of cheap black fabric from Walmart for the big lower panels. I bought two patterns for the four mid-panels I had, getting 2 yards of each fabric. The thicker fabric is best for the metal panels, while cheap stuff from Walmart works fine on the cloth ones. It's very thick, kinda expensive, but totally worth it for getting only a couple of yards. We did however remove an entire wall section across from us so we'd have a shortcut to our other coworkers.įabric time!! I got mine from IKEA, hidden back in pillow covers and the like. I only removed a quarter wall from behind me so I can see my coworkers more easily, which just required removing a cross bar and two vertical bars. If you're going to remove an entire cube section, you'll need the alan wrench to loosen four or so clips, which you can then twist up and slide the section out. The black cross bars are removed easily by removing two screws, and the vertical bars are just held in by a clip (no screwing required). now I can't get it back on), but I found they don't really need to come off to reupholster them. I haven't figured out a way to remove it on purpose (one fell off on me when I knocked it on accident. You have to remove the panels top to bottom, and the lowest panel is actually attached to the frame. Once I removed those and the bar, taking the panels off was as simple as lifting them up a bit, tilting the bottom out towards me, and then lifting them all the way off. With my wall set, there were two screws in the top bar of each cube section. ![]() But by the time you move on the second, it should just take a couple of seconds. The first wall that you take apart will probably take you awhile to do, discovering all the tricks and what-not. Take apart the cubical!! Each cubical set is different, so because of that, I don't really see the point of describing it in detail. So this is probably the quickest and most fun step. I also got fake grass, butterflies and some river rocks for my "atrium". As far as the reupholstering goes: masking tape, fabric pins, scissors, and the fabric(s) of your choice. but those are the only two I needed for taking mine apart. ![]() Different cubicals require different tools. Basic phillips-head screw driver (I found having two of these and a bored co-worker really helps), and a set of alan wrenches. The tools are common and easy to find in an office environment. so I thought I'd make one, for all those of you out there wanting to know you're not alone in wanting to recover your walls. Looking around on the internet, I couldn't find any kind of guides or anything for taking apart cube walls or reupholstering them. We decided to have a cube decorating contest amongst my team, so I took that opportunity to reupholster my cube walls. I really wasn't feeling the plain gray and white cube walls in my part of the bullpen, at all. So I just started here at (insert large IT company) and I was lucky enough to join a team moving into the new buildings on campus.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |